Fabricating Novel PDMS Vessels for Phantoms in Photoplethysmography Investigations

This paper introduces a novel technique for the development of custom polydimethylsiloxane (PDMS) vessels for use in phantom technologies. The method involves continuous dip coating of commercial silicone tubes with rapid curation in a single controlled process. The technique accommodates the production of different vessel diameters, wall thicknesses (56 µm-80 µm) and mechanical properties.

• Published in 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) (2020).

This paper introduces a novel technique for the development of custom polydimethylsiloxane (PDMS) vessels for use in phantom technologies. The method involves continuous dip coating of commercial silicone tubes with rapid curation in a single controlled process. The technique accommodates the production of different vessel diameters, wall thicknesses (56 µm-80 µm) and mechanical properties. Clear phantoms were fabricated to compare the commercial silicone tubes against the customs vessels. A pulsatile fluidic pump (BDCLabs, CO, USA) driven by a computer controlled linear motor generated the pulsatile flow through the phantom. The resulting flow profile, using the custom vessels, simulates human blood flow and the detected contact PPG signal from the phantom closely resembles the morphology of in vivo PPG waveforms with signal-to-noise ratios of 38.16 dB and 40.59 dB, compared to the closest commercially-available tubing at 5.38 dB and 10.59 dB for the red and infrared wavelengths respectively. The rigidity and thick walls of commercial silicone tubes impede the expansion of the tubing under systolic pressure. This technique eliminates this common limitation in phantom development.

Verbatim from Europe PMC (opens in a new tab) · Abstract via Europe PMC; © the authors/publisher

No results from this paper on ChatPPG leaderboards yet. Browse the leaderboards.